-
after you have formatted the hard drive
it is ready for installation
-
before you turn on you computer make sure
the windows start-up disk is in the computer
-
you will have a menu on the computer and
you'll select "2 start computer with cd-rom support"
-
type in "2" and it will take it a few
minuets to boot up
-
as the computer boots you'll see that it
will tell you the drive letter for the cd-rom this is important because
you'll need to know this letter to install windows from the cd
-
once it's ready you'll have an "A:\" on
the screen
-
first you'll type in "E:\" and press
"enter" (or if you cd-rom is a different drive letter than this type that
letter instead of "E")
-
now you'll see "E:\" on the screen type
in "setup" and press "enter"
-
it will first run you through a disk scan
so you'll hit "enter" to continue
-
once the disk scan is done it will run
through a surface scan this isn't something that needs to be done unless
you know of a former problem
-
when it's done you'll want to press "x"
not enter to exit the scan program
-
it will automatically start the
installation process
-
the rest you'll just follow the
instructions it gives you there are just a few things you want to know
